Stockly.com Forums  

Go Back   Stockly.com Forums > Misc > Chit Chat

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 12-01-2006, 12:55 AM
copperclad copperclad is offline
Junior Member
 
Join Date: Nov 2006
Posts: 5
Default Conrad Zeus model V1 question?

hi
i have been trying to find some info on a toy i had in the mid 60's , i believe it was based on the mechanical card racks that Conrad Zeus built to use as memory or adders for his first machine the V1 , the toy was given to me when i was young and i had no interest in it at the time , as i recall it was a rack of 9 cards held in a frame , up on edge , and it could be programmed by inserting short lengths of soda straw on the edge of each card , i believe it functioned as an binary adder , years later i became interested in computers and came across a picture of Conrad Zeus standing in front of his V1 , and sure enough on top were a row of these card racks , so long story short , i would give my eye teeth to find out more about what these were and how they worked , i have googled around the web , but i am not sure what they may be called and other than following out links to Zeus , i haven't been able to find anything , comming across this site , it occured to me , someone here might know , thanks , dana
Reply With Quote
  #2  
Old 12-01-2006, 10:27 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

You might also want to ask your question at these two places:

http://www.vintage-computer.com/vcforum/index.php

and

http://groups.google.com/group/alt.folklore.computers

Reply With Quote
  #3  
Old 12-02-2006, 04:57 PM
copperclad copperclad is offline
Junior Member
 
Join Date: Nov 2006
Posts: 5
Default

hi Grant
thanks for the links , they were both new to me , and very cool , thanks again , dana
Reply With Quote
  #4  
Old 12-16-2006, 12:23 AM
copperclad copperclad is offline
Junior Member
 
Join Date: Nov 2006
Posts: 5
Default

hi
i ended up finding out what i was looking for and thought i would post it back here incase anyone was interested , thanks again , dana

here is a link to an emulator i found
http://www.scoopsfolks.com/digicomp1/

Quote:
The Digi-Comp 1 is the "first real operating digital computer in plastic."

This is a great educational, toy computer that has been a delight for many. This was an introduction to Boolean logic and programming for many children. It requires no batteries but is operated mechanically, and demonstrates basic logic principles. Its versatility is amazing.


This Digi-Comp 1 was produced by E.S.R. Inc. in about 1963.
Attached Images
 

Last edited by copperclad; 12-16-2006 at 12:38 AM.
Reply With Quote
  #5  
Old 03-02-2008, 04:42 PM
sje sje is offline
Member
 
Join Date: Nov 2006
Posts: 62
Default More on the Digi-Comp machines

There were two Digi-Comp models:

http://www.oldcomputermuseum.com/digicomp_1.html

http://www.oldcomputermuseum.com/digicomp_2.html
Reply With Quote
  #6  
Old 03-02-2008, 07:01 PM
sje sje is offline
Member
 
Join Date: Nov 2006
Posts: 62
Default Konrad Zuse

"Konrad Zuse" is the correct spelling of the man who, more than any other person, was the inventor of the program controlled digital computer. He also developed the first high level programming language, the PlanCalculus. Unfortunately for Zuse, his work in Germany in the early 1940s was poorly funded and encountered serious setbacks due to airborne deliveries by British and American strategic bombing missions.

Zuse started in his parents' basement designing relay based calculators. He built the first full scale relay computer, the Z3, in 1941. It successfully performed programmed floating point calculations all day long at a whopping five Hz. Zuse is also known for designing and building a fast binary adder/subtracter with only two relays (four pole, double throw) per bit.

For more on Zuse, see: http://en.wikipedia.org/wiki/Konrad_Zuse

Why do I know this? In part because I'm designing the Rhea (Relay Hacker Experimental Analysis) language to be used for describing and implementing relay calculators and relay computers. I hope the simulation, complete with graphics, runs faster than five Hz. (Even on a 2 MHz 8080!)

For a recent working physical implementation of a working relay computer, see: http://web.cecs.pdx.edu/~harry/Relay/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:22 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.