Stockly.com Forums  

Go Back   Stockly.com Forums > Altair 680 > Altair 680

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-18-2008, 11:16 AM
bugman bugman is offline
Member
 
Join Date: Nov 2007
Posts: 30
Default Up and Running

Well, got it running last night. Have not completed the back panel yet, or tried the terminal interface. But the main board and control board are in and I put power to the mainboard. Seems to be operating OK. Am able to observe memory locations and deposit new data. Will try a simple program tonight.

I do have one concern though that may or may not be normal. When I initially power up the mainboard, all the leds come on for a bit. Then they begin to correctly reflect the memory location and data. But the panel does not become stable for about 10-30 seconds. So to re-cap, upon power up, all leds light up for about 5-10 seconds. Then the leds operate correctly, with a few (seemingly random) flashes of all leds on. Then it becomes rock stable after 10-30seconds. I notice that the effect is more dramatic if the computer has been sitting off for a while vs. turning it off and on.

I'm no expert, but it feels to me that this is either, normal cpu cylcing, or voltages becoming stable/capacitors charging. It does not feel like an intermittent connection because it doesn't last more that 30 seconds max.

Any thoughts?

Last edited by bugman; 06-18-2008 at 12:34 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:30 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.