Stockly.com Forums  

Go Back   Stockly.com Forums > Kenbak-1 Series 2 > Kenbak-1

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2007, 03:55 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Talking Mine is coming along -- new parts

My Kenbak is coming along. I spent almost the entire weekend making some parts on my (Sherline) mini-mill.

I had two very nice small fans that I'd pulled from surplus equipment, and some 1/8" x 3" wide aluminum plate stock, so I cobbled together adapter plates to mount in in the Kenbak. The fan near the memory blows in, and the other blows out.

I also made a u-channel bar to hold all the buttons. I tried attaching it with velcro, but that was too thick, so I settled for some vinyl super-strength double-sided tape.

I powered up the unit without chips, and nothing blew up. So far so good!

I'm including pictures. One shows an alternative 60 Watt power supply I have that I might switch to eventually. It will leave the motherboard completely visible.

Astute observers will note that I've reversed my back panel. It is a long, rather embarrassing saga, but all turned out well -- I bet I have the only Kenbak clone signed signed TWICE by John Blakenbaker. (Thanks John!)

I'm having a great time, obviously. Thanks, Grant!

tonyv
Attached Images
 

Last edited by tonyv; 12-10-2007 at 04:12 PM.
Reply With Quote
  #2  
Old 12-10-2007, 03:56 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Default more photos

More...
Attached Images
 

Last edited by tonyv; 12-10-2007 at 03:58 PM. Reason: forgot photo
Reply With Quote
  #3  
Old 12-10-2007, 03:59 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Default More...

more...
Attached Images
 
Reply With Quote
  #4  
Old 12-10-2007, 04:04 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Default Alternative 60 W (+/- 5 V, +/- 12 V) power supply

I had this in my (rather large) supply of surplus robot parts.
It says "EOS VLT60-3000"

Ooops. No -5 volts. Just +5, +12, and -12 (just what we need).
Unfortunately, it looks like this one is no longer made.
Attached Images
 

Last edited by tonyv; 12-10-2007 at 08:00 PM.
Reply With Quote
  #5  
Old 12-10-2007, 06:12 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

Quote:
Originally Posted by tonyv View Post
I'm including pictures. One shows an alternative 60 Watt power supply I have that I might switch to eventually. It will leave the motherboard completely visible.
That looks like a good one. Who made it?

Astute observers will note that I've reversed my back panel. It is a long, rather embarrassing saga, but all turned out well -- I bet I have the only Kenbak clone signed signed TWICE by John Blakenbaker. (Thanks John!) [/quote]

Now you'll have to explain it.
Reply With Quote
  #6  
Old 12-10-2007, 06:44 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Default

Well, supposedly
http://www.eoscorp.com
but that doesn't seem to work anymore.

Ah HA! They were purchased in 2001 by Celetron:
http://www.celetron.com
Oops! that doesn't work either....

Another pdf:
http://www.lens.unifi.it/ew/dwl.php?...pplication/pdf

Source?
http://store.raqware.com/product_inf...products_id=63
still says they sell them for ~$100, qty 1. (ouch!).

tonyv

Last edited by tonyv; 12-10-2007 at 08:01 PM. Reason: found good link
Reply With Quote
  #7  
Old 12-10-2007, 10:43 PM
Cappellanus Cappellanus is offline
Junior Member
 
Join Date: Jul 2007
Posts: 24
Default Alternate power supplies....

Great work!

I like that little power supply. A similar part number (Red Rocket Power supply bought out the company) is available from Arrow at www.arrownac.com. The part number is VLT60-3000S55LF and the price is $61.57. That 2 x 4 x 1 inch profile is great. The correct new address for Red Rocket is... http://redrocketp07.s3.nextex-media.de/

I have some similar supplies that are a bit bigger 3 x 5 x 1 inch, that are a fraction of that price here...
http://cgi.ebay.com/ws/eBayISAPI.dll...m=200109647904

That's right, for about the same price, you can get 10 (ten) of these little power supplies. I know (from experience) that this fellow will sell you 1, 2, 5, or however many you want, just ask him. He has about 20 available, and even with shipping, you should be able to get one for under $20.00.

Great machining. I too, have a little sherline mill and lathe. I'm not sure you'll need the fans much, but they look "cool." I guess I'm the only person who's mounted the switches from the front.

Last edited by Grant Stockly; 09-10-2012 at 09:13 PM.
Reply With Quote
  #8  
Old 12-10-2007, 10:51 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

Quote:
Originally Posted by Cappellanus View Post
Great work!

I like that little power supply. A similar part number (Red Rocket Power supply bought out the company) is available from Arrow at www.arrownac.com. The part number is VLT60-3000S55LF and the price is $61.57. That 2 x 4 x 1 inch profile is great. The correct new address for Red Rocket is... http://redrocketp07.s3.nextex-media.de/

I have some similar supplies that are a bit bigger 3 x 5 x 1 inch, that are a fraction of that price here...
http://cgi.ebay.com/ws/eBayISAPI.dll...m=200109647904

That's right, for about the same price, you can get 10 (ten) of these little power supplies. I know (from experience) that this fellow will sell you 1, 2, 5, or however many you want, just ask him. He has about 20 available, and even with shipping, you should be able to get one for under $20.00.

Great machining. I too, have a little sherline mill and lathe. I'm not sure you'll need the fans much, but they look "cool." I guess I'm the only person who's mounted the switches from the front.
I use a small astrodyne power supply in the Altair 680. It looks almost identical to yours but is only $35 or so. I'm not sure if mine has the correct voltages though.
Reply With Quote
  #9  
Old 12-10-2007, 11:32 PM
tonyv tonyv is offline
Junior Member
 
Join Date: Nov 2007
Posts: 15
Default

Quote:
Originally Posted by Cappellanus View Post
I like that little power supply. A similar part number (Red Rocket Power supply bought out the company) is available from Arrow at www.arrownac.com. The part number is VLT60-3000S55LF and the price is $61.57. That 2 x 4 x 1 inch profile is great. The correct new address for Red Rocket is... http://redrocketp07.s3.nextex-media.de/
Oooo! Good sleuthing! I tried for an hour or so to figure out who owned the EOS product line now, but didn't manage it. I'll have to see if Arrow sells the cover for the one I have -- I didn't really want to mount an open frame unit in my Kenbak, in case my kids want to poke around in it someday.

tonyv
Reply With Quote
  #10  
Old 12-11-2007, 01:45 AM
Cappellanus Cappellanus is offline
Junior Member
 
Join Date: Jul 2007
Posts: 24
Default Picture of the 3x5x1 supply...

Here's a picture of the eBay $9 power supply (plus around $7 for shipping) in the approximate place (above the original.)

It's bigger than yours, but smaller than the original version. I think I'll install it when I get a chance. Would need to cut and drill out a couple of 3 inch brackets. So many projects, so little time.

Don't be afraid of socketing all the chips and turning it on!!! I know it's a bit scarey to think it may not work. I think I hesitated for a couple days, double checking solder, placement, orientations, etc.
Attached Images
 

Last edited by Grant Stockly; 09-10-2012 at 09:13 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Parts for Altair? proemer Altair 8800 4 11-17-2008 10:42 AM
Optima case parts frotz Altair 8800 3 01-22-2008 05:58 PM


All times are GMT. The time now is 10:28 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.