Stockly.com Forums  

Go Back   Stockly.com Forums > Altair 680 > Altair 680

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-02-2008, 02:44 AM
bugman bugman is offline
Member
 
Join Date: Nov 2007
Posts: 30
Default Front Panel Help

I have reached the point of front panel assembly where the modifications are needed (jumpers, capacitor, resistor). From the pictures, I'm having trouble seing exactly where to make the connections. Could someone provide a text description of where these components should be installed?

Thanks,
Brian

Last edited by bugman; 06-02-2008 at 02:52 AM.
Reply With Quote
  #2  
Old 06-02-2008, 04:34 AM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

I'm not very good with words! Lets try some high resolution pictures first!

The capacitor is .1uf, the resistor is 10 ohm, Brown Black Black

If after these you still have questions, please ask...


ONE cut trace next to R31


TWO cut traces


Jumper Wire on Top


Second view of jumper wire on top


Jumper wire on the bottom
Reply With Quote
  #3  
Old 06-02-2008, 11:10 AM
bugman bugman is offline
Member
 
Join Date: Nov 2007
Posts: 30
Default

Thanks Grant,

I think the glare coming off solder points was making it difficult to see on the lower resolution printed pics. Those higher resolution pics helped.

Specifically, I was having trouble seeing if the connections were made to more than one solder point (they are not). Also, I couldn't tell that one end of the jumper, and one end of the resistor, are directly attached to an end of a broken trace.

Thanks for the clarification.
-Brian
Reply With Quote
  #4  
Old 06-02-2008, 10:44 PM
Geoff Harrison Geoff Harrison is offline
Senior Member
 
Join Date: Feb 2007
Posts: 104
Default

One observation about the front panel: on pages 8 & 9 of Grant's instructions where he talks about placing nuts on the switches before installing the LEDs to get the correct front panel spacing, the photograph shows one nut on each switch but you really need two if you're going to use the little conical trim nuts after the panel is installed.

Geoff.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front Panel LEDs and Other Issues TomL_12953 Troubleshooting 4 08-20-2009 01:43 AM
Altair 680 Front Panel Programming? lovenewyawkcity Altair 680 1 10-06-2008 02:22 PM
Altair 680 front panel operation sje Altair 680 6 02-04-2008 05:33 AM
Kenbak-1 Front Panel Question OCM Kenbak-1 1 10-08-2007 08:15 PM
Kanbak front panel Geoff Harrison Kenbak-1 0 10-01-2007 09:33 PM


All times are GMT. The time now is 06:22 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.