Stockly.com Forums  

Go Back   Stockly.com Forums > Altair 680 > Altair 680

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-28-2008, 07:35 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default Mini680 Altair 680 Memory Expansion Board

As a "promotion" to the Altair 680 buyers I promised a 32k RAM upgrade. Due to the wait they have had to endure, I've decided to add 512k of Flash memory.
  • The memory is available from 0x0000 to 0x7FFF.
  • There is a 2k gap from 0x8000 to 0x87FF to allow for the onboard 1k of memory AND the optional vintage 2k RAM upgrade.
  • The flash memory is available from 0x8800 to 0xC7FF. This is a 16k window.
  • There is a page register (IC U6) at 0xC8FF to select which of the 32 16k pages you want to access.
What does this mean to non-programmers? It means a bone stock Altair with the upgrade will have 33,792 bytes of RAM instead the stock 1024 bytes.

It also means you will be able to boot Basic and the Assembler/Editor without loading a paper tape image. There is also MORE than enough space in 512k for any other data.

So far the only software I have is the Assembler/Editor and two versions of Basic. These won't even use up the first 16k of Flash.

When I tried to assemble these boards, I noticed DigiKey sent me 25 $5 ADC chips instead of 25 $.60 74ALS574s. I am ordering 25 of the correct chip to be shipped FedEx overnight so that I can move forward with getting your kits out the door!

The PCB design, PLD logic code, schematics, etc will all be available for anyone to modify. The PLD is socketed for easy reprogramming.

Here are some pictures, sorry...I don't have one with it installed...

The configuration below shows the required parts for only the 32k memory expansio. The only parts required for flash is the flash itself and the page register.


The upgrade card plugs into the processor socket on the PCB, and the processor plugs into the PCB.


This is what I had to do to make sure the PCB design worked!
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Original Complete MITS Altair 680 for Sale transient Altair 680 0 06-15-2011 10:42 PM
Altair 8800 VS 680 lovenewyawkcity Altair 8800 1 06-19-2010 01:52 PM
Altair 680 1K Vintage Memory Upgrade Grant Stockly Altair 680 2 04-20-2008 09:02 PM
Old Altair (and related) Manuals Forbin376 Altair 8800 5 02-22-2008 05:19 AM
Help needed wiring display board to expansion board phe Altair 8800 8 04-03-2007 01:07 AM


All times are GMT. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.