#1
|
|||
|
|||
Boot messages
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 09:26:23, Jan 21 2005 Platform: TS-7250 Board (ARM920T) Rev A Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x02000000, [0x00051570-0x01ff9000] available FLASH: 0x60000000 - 0x68000000, 8192 blocks of 0x00004000 bytes each. == Executing boot script in 0.100 seconds - enter ^C to abort RedBoot> fis load vmlinux RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1" Using base address 0x00218000 and length 0x00¤„J Linux version 2.4.26-vrs 1-cirrus-1-2-1-ts7 (eddie@localhost.localdomain) (gcc version 3.3.4) #1 Fri Jan 14 08:59:13 MST 2005 CPU: Arm920Tid(wb) revision 0 Machine: ep9301 On node 0 totalpages: 4096 zone(0): 6144 pages. zone(1): 0 pages. zone(2): 0 pages. On node 1 totalpages: 4096 zone(0): 6144 pages. zone(1): 0 pages. zone(2): 0 pages. On node 12 totalpages: 4096 zone(0): 6144 pages. zone(1): 0 pages. zone(2): 0 pages. On node 13 totalpages: 4096 zone(0): 6144 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyAM0,115200 root=/dev/mtdblock1 Calibrating delay loop... 99.94 BogoMIPS Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total Memory: 61168KB available (1117K code, 302K data, 56K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: Testing write buffer: pass POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA pty: 1024 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled Real Time Clock Driver v1.10f ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize about to do sbc_setinfo -----Searching for NAND flash... NAND device: Manufacturer ID: 0x20, Chip ID: 0x79 (ST Micro NAND 128MiB 3,3V 8-b it) Scanning device for bad blocks Bad eraseblock 479 at 0x0077c000 Bad eraseblock 480 at 0x00780000 Bad eraseblock 2212 at 0x02290000 Bad eraseblock 4565 at 0x04754000 Using static partition definition Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x00000000-0x00004000 : "TS-BOOTROM" 0x00004000-0x07d04000 : "Linux" 0x07d04000-0x08000000 : "RedBoot" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.97 (double precision) yaffs: Attempting MTD mount on 31.1, "1f:01" VFS: Mounted root (yaffs filesystem). Mounted devfs on /dev Freeing init memory: 56K INIT: version 2.85-ts1.00 booting http://www.embeddedarm.com email:info@embeddedarm.com devfsd v1.3.25 started for /dev now mounting /proc mounting local filesystems (in fstab) setting system clock Tue Nov 30 00:41:28 UTC 1999 INIT: Entering runlevel: 3 Setting hostname.... Bringing up interface eth0.. enable_irq(39) unbalanced from c02bcab0 Bringing up interface lo.. setting kernel IP routing tables Starting portmap... Starting INETD... Starting telnetd... Starting apache.../www/apache/bin/apachectl start: httpd started Technologic Systems TS-LINUX/arm 7.0 ts7200 login: root login[75]: root login on `ttyAM0' BusyBox v1.00-rc2 (2004.08.05-21:44+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. $ ls $ pwd /root $ cd / $ ls bin lib proc tmp www dev lost+found root usr etc mnt sbin var $ ps ax PID Uid VmSize Stat Command 1 root 488 S init [3] 2 root SW [keventd] 3 root SWN [ksoftirqd_CPU0] 4 root SW [kswapd] 5 root SW [bdflush] 6 root SW [kupdated] 7 root SW [mtdblockd] 54 1 476 S /sbin/portmap 59 root 716 S /usr/sbin/inetd 64 root 424 S /usr/sbin/telnetd 73 root 1056 S /www/apache/bin/httpd 75 root 672 S -sh 76 root 536 S /sbin/getty -L 115200 ttyAM1 77 nobody 1080 S /www/apache/bin/httpd 78 nobody 1080 S /www/apache/bin/httpd 79 nobody 1080 S /www/apache/bin/httpd 80 nobody 1080 S /www/apache/bin/httpd 81 nobody 1080 S /www/apache/bin/httpd 85 root 588 R ps ax |
#2
|
|||
|
|||
ts7250 eth0 problems -- enable_irq(39) unbalanced
I'm having eth0 problems on my ts7250...and am seeing the same sort of error message in the log that you posted.
Bringing up interface eth0.. enable_irq(39) unbalanced from c02be47c Were you having problems with your ethernet? If so, how did you resolve the issue. Thanks, Tom Johnson |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
address for disk boot rom / startup | lovenewyawkcity | Altair 8800 | 1 | 01-04-2007 06:24 AM |