View Single Post
  #8  
Old 08-27-2009, 03:59 AM
benalford benalford is offline
Junior Member
 
Join Date: Sep 2008
Posts: 12
Default 8800 D/C Board

Marty:

My Bad, ICK is correct. I misread pin 2 for pin 12. As for J1 on 8800 D/C board the end opposite wire connection 39 dead ends. I looked through the board with a strong light. But Ic S is connected to wire connection 39 but not through J1.

Thanks once again.
Your Help Is Greatly Appreciated.

Ben
Reply With Quote