Thread: The RamWall...
View Single Post
  #11  
Old 01-08-2006, 02:22 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

Path: g2news1.google.com!news1.google.com!news4.google.c om!border1.nntp.dca.giganews.com!border2.nntp.dca. giganews.com!nntp.giganews.com!atl-c08.usenetserver.com!news.usenetserver.com!pc03.us enetserver.com!FUSE.NET-a2kHrUvQQWlmc!not-for-mail
From: "Bart" <bborb@fusedotnet>
Newsgroups: sci.electronics.basics
References: <1136172350.049224.231720@o13g2000cwo.googlegroups .com> <1136173371.832018.44540@g44g2000cwa.googlegroups. com> <1136179693.825070.183100@g43g2000cwa.googlegroups .com> <5c60.43b8f53a.d0b55@clunker.homenet> <1136203193.354765.163350@o13g2000cwo.googlegroups .com> <a3259$43b99411$d844260c$5737@FUSE.NET> <1136239984.338696.151020@g14g2000cwa.googlegroups .com> <43b9bd0f$0$10078$ba620dc5@text.nova.planet.nl> <1136275607.887275.108960@z14g2000cwz.googlegroups .com>
Subject: Re: Wall of RAM
Date: Tue, 3 Jan 2006 06:42:43 -0500
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <eaab1$43ba6331$d84426ba$1123@FUSE.NET>
X-Complaints-To: abuse@usenetserver.com
Organization: UseNetServer.com
Lines: 21
X-Trace: eaab143ba63317de1831f01123

Just a thought, if you're going thru so much labor, maybe have a board
drilled to make a significant sign, shape, or lettering that you could sell
to a business or school, donate to a church.
Bart

"logjam" <g...@cmosxray.com> wrote in message
news:1136275607.887275.108960@z14g2000cwz.googlegr oups.com...
> Up here in Alaska we don't have much desert sun, so that might be a
> problem.
>
> Here is a picture of a 26x22 array. I got this far and then was worn
> out. Used a little over 500 LEDs on this one! I was worn out because
> the board was wired completely by hand. I would use a PCB from a
> company on this project...
>
> http://media.diywelder.com/images4/0...dback_1020.jpg
>
> http://media.diywelder.com/images4/0...front_1021.jpg
Reply With Quote