View Single Post
  #8  
Old 07-10-2007, 05:19 PM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

If you didn't clip the long wires off that terminate into the motherboard then maybe they are touching underneath.

Look at the bottom of schematic 880-106 for S2. The two switch has two Pull-up resistors, R13 and R14. The switch also goes through an inverter, 04, and then through a buffer, marked as "X" (does not invert).

You should see pin 3/4 on IC'W and pin 10/9 on IC'X when trying to protect

Pin 1/2 of IC'W and 4/5 on IC'X when trying to unprotect
.

What do you see? Take out the memory card when doing this test.
Reply With Quote