Hi Geoff;
Well, I took out all the wires for pins 1 and 2 and 4 for 'D' and 'E' and all the wires to the connector associated with these pins. and I took out all of the resistors and caps and diodes below the molex connectors.. hoping that, that would make a difference... but it didn't.. The board still passes the echo test, but will not download correctly.... it is at 4800 baud... I can slow it down to 300 baud, and just try the second stage loader. to see if that helps....
Any Ideas ??????
You are becomming the Sio Man !!!!
THANK YOU Marty