Up and Running
Well, got it running last night. Have not completed the back panel yet, or tried the terminal interface. But the main board and control board are in and I put power to the mainboard. Seems to be operating OK. Am able to observe memory locations and deposit new data. Will try a simple program tonight.
I do have one concern though that may or may not be normal. When I initially power up the mainboard, all the leds come on for a bit. Then they begin to correctly reflect the memory location and data. But the panel does not become stable for about 10-30 seconds. So to re-cap, upon power up, all leds light up for about 5-10 seconds. Then the leds operate correctly, with a few (seemingly random) flashes of all leds on. Then it becomes rock stable after 10-30seconds. I notice that the effect is more dramatic if the computer has been sitting off for a while vs. turning it off and on.
I'm no expert, but it feels to me that this is either, normal cpu cylcing, or voltages becoming stable/capacitors charging. It does not feel like an intermittent connection because it doesn't last more that 30 seconds max.
Any thoughts?
Last edited by bugman; 06-18-2008 at 12:34 PM.
|