Stockly.com Forums

Stockly.com Forums (http://www.stockly.com/forums/index.php)
-   Troubleshooting (http://www.stockly.com/forums/forumdisplay.php?f=14)
-   -   Power Supply Upgrade (http://www.stockly.com/forums/showthread.php?t=34)

Charles 11-30-2006 07:38 PM

Power Supply Upgrade
 
I have an original 8800 that I built when they first came out. I would like to upgrade the power supply. would you share information on the commercial power supplies you are using in the new kit?

Grant Stockly 12-01-2006 10:24 PM

Yes.

One of them is a 7.5v 100W and the other is +5/+15/-15v 60W. Both supplies have a trim screw to raise the voltage of each by 10%. This will bring the voltages into S-100 spec of 8v and 16v. However I've been running my altair on 7.5v and 15v for a while know. Seems to reduce heat quite a bit and not cause any negative operation.

Power Factor has several power supplies larger than 100W. The largest is 320W at 7.5v. PLENTY for an S-100 system! :)

http://www.power-factor-1st.com/shop...es/s-100f.html

http://www.power-factor-1st.com/shop...ries/t-60.html

Grant Stockly 09-30-2008 04:15 PM

It seems the links have changed. The new ones are:

http://www.power-factor-1st.com/g2-series/s-100f.html - S-100F-7.5

http://www.power-factor-1st.com/g2-series/t-60.html - T-60C

proemer 09-30-2008 07:54 PM

Thanks again, Grant.

My original 8800b had been running for years with 7.6 V actual on the 8 V unregulated lines.


All times are GMT. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.