Stockly.com Forums

Stockly.com Forums (http://www.stockly.com/forums/index.php)
-   Altair 680 (http://www.stockly.com/forums/forumdisplay.php?f=25)
-   -   Alternative D/C Board Fix!!!!! (http://www.stockly.com/forums/showthread.php?t=627)

Grant Stockly 06-03-2008 07:57 PM

Alternative D/C Board Fix!!!!!
 
Geoff has a vintage machine which he noticed had the reset fix applied differently. He has made the modifications to his kit using this method. It looks very nice!

Here are his pictures and instructions:

http://www.solivant.com/altair680/images/w-IMG_0115.jpg
Quote:

I decided to make the reset fix trace cuts early. I also drilled a couple of holes so that I could mount the additional resistor and capacitor through the board.
http://www.solivant.com/altair680/images/w-IMG_0125.jpg
Quote:

The extra capacitor (top right, below C8) and resistor (bottom right) are mounted like this.
http://www.solivant.com/altair680/images/w-IMG_0119.jpg
Quote:

The other jumper is on the switch side.
http://www.solivant.com/altair680/images/w-IMG_0120.jpg
Quote:

The capacitor is connected like so ...
http://www.solivant.com/altair680/images/w-IMG_0124.jpg
Quote:

... and the extra resistor like so.
Nice!


All times are GMT. The time now is 08:13 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.