Stockly.com Forums

Stockly.com Forums (http://www.stockly.com/forums/index.php)
-   Altair 8800 (http://www.stockly.com/forums/forumdisplay.php?f=15)
-   -   8800 kit status? (http://www.stockly.com/forums/showthread.php?t=592)

n0jcf 04-11-2008 01:58 AM

8800 kit status?
 
Grant, seems like you're probably in "680-mode" lately but am curious what the
status is for 8800 kits. Are you taking reservations? do you have kits in stock? Are
you planning another run? If a guy wanted to order one today, how would that work?

Thanks.

Chris

Grant Stockly 07-23-2008 12:54 AM

I'm not happy with the PCBs. I will be ordering more to replace these, and I can only hope they give me at least 50% off. I didn't catch the problem and since I ordered them last November it doesn't look good for me to complain now!

I was packing the PCBs into padded envelopes and on the 15th set I noticed problems with both the 1k memory PCB and CPU board. These kits are (to me) more "art" than useful. Don't get me wrong here, you can do everything with them now that you could in the 70s...but at $1499 they had better look good, right? :)

I have handled quality control with these kits based on if -I- would buy the parts. I don't like these PCBs, I wouldn't want to pay $1500 to get them from someone else, so I won't ship them to you guys!

This last batch of 8800s has hurt. I bought 20 extra front panels for $800, and now it looks like 20 CPU and 20 1k memory cards (about $1200) are bad. Now I'm hoping to get my $800 back, and I'm hoping to get half or more back on the PCBs... That doesn't matter to you guys though, as long as you get good parts.

The kit and all of its parts need to look perfect, regardless if the parts are displayed individually under glass or not. :)

IF they do not take the PCBs back, who would be interested in them at $20-$30 a piece?


Keep in mind that these bad PCBs were from a reorder. In other words, I did NOT resubmit any files!!! :confused: :eek: :( Here are the problem images:

http://www.stockly.com/images4/080722-PCB_Problem.jpg

I pay an extra $8 per PCB to get gold fingers. The latest batch doesn't have any gold on the power traces. Not too bad, but looks bad and considering the extra money I paid for the gold...


http://www.stockly.com/images4/080722-CPU_Edge_4467.jpg

The card edge on the CPU card...there is a long story with this one, it anyone is interested then ask. :)


http://www.stockly.com/images4/08072...Moved_4465.jpg


Regardless of which one is "good" and which one is "bad", I don't understand why they have to mess with my CAD files!

I will keep you guys updated. This will delay by 1.5 to 2 weeks. I hope you understand...

Grant Stockly 09-02-2008 12:52 AM

Once upon a time, 2 years ago, I bought a batch of 10 1k memory boards. They were the first boards that I'd ever had made with a solder mask and silk screen, so I was very nervous. These boards did NOT have gold fingers and they turned out GREAT!

On the second batch of PCBs I decided to add gold plating to the fingers and a beveled edge to the card edge. I created a "mask" to go over the area that I wanted to be exposed to gold. This mask was larger than it needed to be, but it didn't bother me since it hung over the edge of the PCB. The tops of the fingers on the boards without gold fingers are covered up with green solder mask.

http://www.stockly.com/images4/080722-CPU_Edge_4467.jpg

They sent me $3500 worth of PCBs in that first order, and about $3000 of them were wrong. All of the boards looked like the top board in the above picture, some worse. They thought that the entire gold finger should be exposed, so they bumped my mask up. Since my mask was too large, it made the board look bad. They also modified the solder mask/silk screen in quite a few areas.

Because of this costly error on their part, they set it up so that they would send me a check plot on every order before it went to manufacturing. This is basically them e-mailing me my gerber files back to myself. I don't understand why they need this process, as far as I'm concerned they should just stop editing my files!

When I went to reorder the PCBs, they assured me that they would be using the latest batch of engineering files, but they didn't. They used the old files, and modified them AGAIN...

The reason I want to reorder the PCBs from the same part number is I want to save $200 or so in "engineering" fees. Regardless of saving money, there is also no guarantee that a new part number wouldn't be edited either...

The thing that surprises me is that the CPU card (shown above) had the bad gold fingers AND at least one area of modified silkscreen. The bad gold finger area was actually in the check plot that they e-mailed me, but NOT the silkscreen modification! So what good are the check plots if they are going to modify the files further after sending them to me!

I may try to get them to discount the CPU boards because of the modification made after the check plots, but I'm doubting they will do it. I am at fault for not catching the gold finger issue.

I will let you guys know as soon as the new boards arrive. Every part of the kits are ready to ship. I would have taken pictures but I left my memory card at work!

Grant Stockly 09-15-2008 11:35 PM

Grant:
Quote:

Neither of the two gerber file checkplots are for the orders I02969A21-1 and I029569A21-2. Those two orders were produced twice because we had the same issues with gold fingers before.

Do you want me to resubmit my gerber files? I don't want to repay for engineering since it was done once already.

Thanks,
Grant
PCB:
Quote:

Hi Grant,


These were the same files that you sent us the second time around to get the boards remade. Please send me the gerbers and I will have the engineers compare the files.
Grant:
Quote:

I didn't resubmit files for the second run. You guys edited them for me. I have the physical boards from those orders and its obvious that they do not match the gerbers.

If I send you files, it will be the first time I've resubmitted files since 12/25/2006.

Would you like me to submit gerber files that represent the physical PCBs?

Thanks,
Grant
PCB:
Quote:

Hi Grant,

I believe this time we got the right files. Please review them and let me know if these are approved or not.

If any questions please feel free to contact me.
Grant:
Quote:

Those files do not represent physical boards from job I029569A21-1 or -2. Do you want gerber files that represent those physical boards? What information can I give you that may be written on the PCBs that would help you find the files/materials used to produce them?

Thanks,
Grant
PCB:
Quote:

Hey Grant,

The files I sent you are the ones from job I029569A21-1 or -2. If you have the files go ahead and send them to me and I will have my
engineer compare them.

If you have the packing slip saved from last time we ran these board let me
know what B# is on that packing slip because that will help as well.
The saga continues...

Grant Stockly 10-03-2008 05:32 PM

Well, I am getting pretty frustrated. All I want is them to be able to send me a check plot file which represents the PCBs I will receive.

They went as far as to actually PRODUCE a PCB to show me that the gold fingers look OK. Great, you can make the PCBs correctly...why can't you e-mail me a proper looking gerber file? The gerber files they send me DO NOT represent what they produce. Someone is modifying the boards, there are production files after whatever gerber files they've been sending me.

Its been 1 month since I placed an order with a 1.5 week lead time. They are now going to produce 2 of each PCB and mail them to me. I will then approve them and then they can produce the boards.

If they can't send me working check plots, then I guess they will have to send me proofs!

You may wonder why its so important that I buy PCBs from these guys. I would consider it important since their PCBs all look identical. The color and gloss of the finished PCBs are all identical. I have hundreds of PCBs (good by the way) of peripheral cards for the Altair kit, including the front panel. Other companies I've ordered from in the past have different looking PCBs, and also deliver PCBs in batches days apart that don't look the same.

I hope that the proof PCBs will arrive early next week so that I can move on!!!

kaluce 10-15-2008 05:08 AM

oddly
 
I'd like to get a kit, but I'm a 21 year old college student with bills, loans, and a need to get a "new" car. spending $1.5k to me for something that while really nifty on the geek scale, but has no TRUE practical function.

I could get a fully functional desktop that emulates the fully assembled kit. But that option lacks the hard physical experience.

While I understand the artistry and novelty aspect of this device; a scratched case, and a bad (but functional) PCB mask is NOT a bad price to pay for a discounted machine. especially if the cosmetic defects are unnoticeable once fully assembled.

So if they were functionally ok, but cosmetically defective, than why not rid yourself of them by selling, especially if they refuse to take them back.

tsiglin 10-16-2008 01:54 AM

Request for price and ship date
 
Hi Grant,

Add me to the current Altair 8800 want list and please let me know pricing of other available items and estimated ship dates...

Regards,
Tom

Cooperstown39 10-31-2008 02:29 AM

Please add me to the wait list for the kit
 
Please add me to you wait list for the Altair 8800 kit. Are there any still available in your recent batch or are they all spoken for?

Thanks in advance,
Coop

sooon2b 11-24-2008 07:08 PM

Allen Hurff - Kit Request - Qty = 1
 
Grant,

If and when a Altair 8800 kit becomes available, I would like to purchase one. I've been following your site and it seems like a great time to request one - if not a current unit but a future order is fine too!

Allen :D

Craig 11-27-2008 03:29 AM

The last email I got was a year ago to the day (11/26/2007). That's a coincidence.


All times are GMT. The time now is 10:28 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.