Stockly.com Forums

Stockly.com Forums (http://www.stockly.com/forums/index.php)
-   Troubleshooting (http://www.stockly.com/forums/forumdisplay.php?f=14)
-   -   Meca (http://www.stockly.com/forums/showthread.php?t=479)

marty 07-10-2007 02:26 AM

Meca
 
Does anyone know anything about the MECA (intelligent ) Cassette system, using the (s-100) Alpha-1 Control Board. it also uses Phi-dec tape decks.
I have the system but I have lost the 16 pin Header that holds the resistors and capacitors that it uses and don't know the values . Nor how to find them, and what frequencies the system used. Which is what the res. and caps. determine with the phase-lock-loop. Any Ideas ???? I have reverse engineered most of the Alpha-1 board. I had lost the schematic that I had, I have the tapes for it, but I can't read them.:( Thanks Marty

JohnG 12-10-2010 07:19 PM

MECA Alpha-1 Info
 
Marty,

I have an Alpha-1 with documentation but no tapes (they were destroyed in a flood). If you're still interested, I'm sure we can help each other.

John G

marty 12-11-2010 12:11 AM

Meca
 
Hi John;
YES, I am interested in what Manuals you have, also do you still have the Meca system (Alpha 1) ????????????????
THANK YOU Marty

marty 12-14-2010 11:30 PM

Meca
 
Hi JohnG;
I could use either a Picture of the 14 pin header (Lower left hand Corner) that I can read the Values, If you have the Alpha-1 Card, or If you could copy down the Values..... and any Documentation you may have.....
THANK YOU Marty


All times are GMT. The time now is 06:11 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.