New Kit Sales!!!

[Grant Stockly]

My wife and I are finishing unpacking and setting up the kit stuff. It has been packed away while we moved.

I will be sending order forms to people who have sent me a private message or an e-mail. When things are ready to ship, I will collect money and mail them out.

Immediately I have about 8 Kenbaks, 8 Altair 680s, and about 10-11 Altair 8800s.

I'm not sure how many more 680s or Kenbak's I will make, if any. There hasn't been much demand for them.

I will make 20 more Altair 8800 kits as soon as the current kits sell.

Since the Altair 8800 kits are usually customized, it will take some time to pack those kits. (memory boards, serial boards, EPROM boards, etc)

If you haven't already expressed interest, then you can e-mail me at grant@stockly.com, reply to this message, or send me a private message.

I will start sending the e-mails out after I have the order form worked out.

[KamikazeMercenary]

Hey Grant,

I think I'd be interested in an Altair 8800. Can you please provide me the details - kit contents, price, how you want payment, etc? Thanks.

[Grant Stockly]

I'm trying to send you the order form. If you didn't receive it, please let me know.

[Drwass2]

Grant
hopefully, I was able to fill in your form and email back to you my order for a Kenbak. I hope to donate it to MARCH (Mid Atlantic Redtro Computer Hobbyist).
which is the vintage computer group at INFOAGE here in NJ at Camp Evans. This is probably the only vintage computer we don't have.
If you did not get it, email me and I will use slow mail.
I did not have compatible reader so had to shuffle format around using open office. I think it worked.
Evan

[livewire]

Hi Grant,

I am interested in buying one of your Kenbak kits.
Could you send me an order form?

If there are no more complete kits available, and you have any extra boards and / or chassis on hand, I would gladly pay for one of them.

Please let me know.

Thanks, Jim / livewire

[Grant Stockly]

And we are back online, for good! :o More later on the full story...

[hwrdmltn]

Hi;
Are you still purveying Altair 8800 kits? Or could you let me know when the next buy might be? Thanx...

73 de W1ARQ Howard

[astrorat]

So how do I get on the list for the next available Altair 8800 kit?

[Grant Stockly]

I will have some kind of announcement about that. I have a few in stock and will be ordering 20 more. I don't know how many I have available, if any. Some people have already expressed interest back in 2013 when I tried to make more.

[Archie_X]

Hello Grant! I've been haunting your website and forums for a long while, just hoping for an announcement like this! Now my next hope is to save up the necessary funds to invest in one of your gem replicas later this spring or summer!

[speedbump]

I just saw on the S100Computers forum that you're back!

[kyeakel]

I've looked at your kits for years hoping that would produce more. I hope it's true, as I will buy the Altair 8800 kit ASAP!

Thanks,
Kipp

[Archie_X]

Hey Grant, is there any update on the date of availability for your 8800 kits? Cost?

I'm also curious as to what cards you will have available for it, as it would appear the last time you updated your website many years ago you were working on building new ones?

Thanks!

[Grant Stockly]

I have two remaining obligations before I start anything new.

I do have a lot of ideas and new ideas! I'm very short on both time and money at the moment, but after I finish those two things we should be able to have some fun! :cool:

[Aaron]

Are you likely to be selling any more Kenbak kits in the near future? Ever since I discovered it, I've wanted one, but I only discovered it about a year ago after you had gone on hiatus from producing kits.

[warp_foo]

Any updates?

I missed out on your first run of units, I'd really hate to miss out again.

Thanks!

Mike

[TomL_12953]

I just saw on the S100Computers forum that you're back!

I looked on S100 but didn't see anything. What's the URL?

Tom L

[Archie_X]

Hey Grant, any new updates? It's been a year since we've heard from you! :D

[mathman]

My wife and I are finishing unpacking and setting up the kit stuff. It has been packed away while we moved.

I will be sending order forms to people who have sent me a private message or an e-mail. When things are ready to ship, I will collect money and mail them out.

Immediately I have about 8 Kenbaks, 8 Altair 680s, and about 10-11 Altair 8800s.

I'm not sure how many more 680s or Kenbak's I will make, if any. There hasn't been much demand for them.

I will make 20 more Altair 8800 kits as soon as the current kits sell.

Since the Altair 8800 kits are usually customized, it will take some time to pack those kits. (memory boards, serial boards, EPROM boards, etc)

If you haven't already expressed interest, then you can e-mail me at grant@stockly.com, reply to this message, or send me a private message.

I will start sending the e-mails out after I have the order form worked out.

Grant

I am interested in an Altair 8800 Kit with some/all of available options, depending on which are best for my purposes. Please send pricing/options info so I can get my order in immediately.
Thanks
Leonard (mathman)

[mathman]

Grant

Looking forward to getting an Altair 8800 kit. I had one of the original Altairs- (as well as a North Star Horizon a bit later) with an ASR-33 Teletype machine and paper tape for program storage. Have done extensive design with Atmel chips, but there's nothing like an Altair, in my opinion!

Thanks for taking on this project.

Mathman

[mathman]

Grant

Where can I find a list of available Altair 8800 Kit boards with prices and a little more info on each board?
Also, I would like to know if your PC boards have hard gold on the connector fingers.
Thanks!

mathman

[TomL_12953]

I have two remaining obligations before I start anything new.

I do have a lot of ideas and new ideas! I'm very short on both time and money at the moment, but after I finish those two things we should be able to have some fun! :cool:

I know this is an old message but I'm still interested in a replica if you ever start producing them again!