PDA

View Full Version : Alternative D/C Board Fix!!!!!


Grant Stockly
06-03-2008, 07:57 PM
Geoff has a vintage machine which he noticed had the reset fix applied differently. He has made the modifications to his kit using this method. It looks very nice!

Here are his pictures and instructions:

http://www.solivant.com/altair680/images/w-IMG_0115.jpg
I decided to make the reset fix trace cuts early. I also drilled a couple of holes so that I could mount the additional resistor and capacitor through the board.

http://www.solivant.com/altair680/images/w-IMG_0125.jpg
The extra capacitor (top right, below C8) and resistor (bottom right) are mounted like this.

http://www.solivant.com/altair680/images/w-IMG_0119.jpg
The other jumper is on the switch side.

http://www.solivant.com/altair680/images/w-IMG_0120.jpg
The capacitor is connected like so ...

http://www.solivant.com/altair680/images/w-IMG_0124.jpg
... and the extra resistor like so.

Nice!